INSTRUMENTS & STUDIO ESSENTIALS
Find your sound.
RIHENK

Explore the store

Chat on WhatsApp
AudientComing Soon

Audient iD1 MK3

  • Brand: Audient
  • Product Code: iD1 MK3
  • Availability: Coming Soon
  • $199.00

Questions about this product? Contact our team.

Audient iD1 MK3 Overview

The Audient iD1 MK3 is a compact USB-C audio interface for recording vocals, guitar or bass at a desk. Its microphone and instrument inputs work at the same time, so you can capture a vocal and guitar performance on separate tracks and adjust the balance later.

Audient iD1 MK3 on a desk beside a laptop and headphones

Set your levels and shape the recording

The Audient Console microphone preamp provides up to 75 dB of gain. Play the loudest part of your take for Smartgain to set the input level, or adjust it yourself. The separate JFET input accepts a guitar or bass directly. Audient’s Analogue Tone Suite lets you colour the mic signal before it reaches your recording software, while onboard DSP provides EQ, compression and reverb.

Audient iD1 MK3 on a studio desk in front of a mixing console

Monitor through headphones or speakers

Direct monitoring lets you hear your live input alongside playback from your DAW. Connect studio monitors to the stereo output, or use the 6.3 mm and 3.5 mm headphone jacks. RoomTune™ can correct speaker monitoring for the room. Setup requires the RM1 measurement microphone, sold separately. Loopback lets you route computer audio into a livestream or podcast.

Key specifications

  • 2 inputs and 2 outputs over USB-C, with power from the USB connection
  • One microphone preamp and one dedicated JFET instrument input
  • 32-bit conversion at sample rates up to 192 kHz
  • Stereo monitor output and two headphone jack sizes
  • Compatible with macOS and Windows
Rear-panel connections

Product videos

iD1 MK3 overview

Audient introduces the iD1 and walks through its recording inputs, controls and monitoring features.

Watch on YouTube

Unboxing and first setup

Audient’s quick-start guide for the iD MK3 range, including iD1. It opens with what’s in the box, then covers connections, software and the first recording.

Watch on YouTube

GLOW sound demonstration

Listen to Audient’s iD MK3 series prototype demos. This clip starts at 10:29, where the audio examples begin.

Watch on YouTube

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good

Specification

Audio Interfaces
Input Count 2
Output Count 2
Connection Type USB-C
Bit Depth 32-bit
Sample Rate 192 kHz
Input Configuration 1 × combo mic/line input 1 × JFET instrument input
Monitor Outputs 2 × line outputs (stereo L/R)
Headphone Jacks 6.3 mm 3.5 mm
Mic Preamp Gain 0–75 dB, with Smartgain
Phantom Power +48 V DC, 10 mA per channel
Dynamic Range 121 dB ADC, 128 dB line out, 125 dB headphones (A-weighted)
Power Supply USB-C bus power
DSP Effects Onboard EQ compression reverb
Analogue Tone Controls ORBIT HMX LIFT GLOW
Monitoring Features Direct monitoring loopback RoomTune™ (optional RM1 mic required for calibration)
Compatibility macOS 12 or later Windows 10/11 iPad iPhone
Dimensions 6.3 × 14.3 × 12 cm
Weight 497 g
Box Contents iD1 MK3 1 m USB-C to USB-C cable